Jj - Grommet (Qty: 3); Magnet Installation; Hh - Magnet (Qty: 2) - Husky 48WC01BP-THD Manual Del Operador

GROMMET INSTALLATION
Items Needed:

JJ - Grommet (Qty: 3)

Process:
• Place the Grommets in the holes in the Bottom and Long
Shelves
Figure 14
Step 14 Result
JJ

MAGNET INSTALLATION

Items Needed:

HH - Magnet (Qty: 2)

Process:
• Place the Magnet on the right door in the locations noted.
• Make sure the adhesive backing is facing towards the
cabinet.
• Close the door to double check the Magnets are in the
correct positions.
• Open the door and remove the protective covering over
the adhesive on the back of the magnet.
• Close the door and press firmly on the front of the door to
seat magnets.
• The magnets will now be attached to the Cabinet Shell in
the correct location.
Figure 15
10
1.50-in
(3.81cm)
1.00-in
(2.54cm)
1.00-in
(2.54cm)
1.50-in
(3.81cm)