Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
CENTER FRAME CONSTRUCTION
Items Needed:
C - Bottom (Qty: 1)
M - Side Left (Qty: 1)
N - Side Right (Qty: 1)
NN - Hinge Plate (Qty: 2)
AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4)
CC - 5/16in Washer (Qty: 4)
DD - 1/4-20 Flange Nut (Qty: 4)
Process:
• Place C bottom with flange up as shown in figure 1 on
the floor. (Use packaging material to prevent scratches).
• Orientate M side and N side so the tabs which hold the
shelves point up. (See illustration.)
• Assemble C bottom inside N side placing (1) NN outside
N side. (See Figure 1).
Note: When placing a hinge plate (NN) on the unit the
loop of the hinge MUST always face towards the outside
of the unit.
• Secure with AA bolt, CC washer and DD nut.
Finger tighten.
• Repeat for other side.
N
M
C
DD
CC
NN
AA
Figure 1
Step 1 Result
ATTACH SIDE SHELVES TOP/BOTTOM
Items Needed:
L - Top/Bottom Shelf (Qty: 2)
DD - 1/4-20 Flange Nut (Qty: 4)
BB - 1/4-20 x 3/4in Button Head Screw (Qty: 4)
Process:
• Attach each L shelf using (2) BB screws and
(2) DD nuts.
• Finger tighten.
• Attach L shelf with square holes positioned away
from frame.
L
Tab
Figure 2
3
BB
Step 2 Result
L
DD
Publicidad
Tabla de contenido
