Cabinet Installation - Glacier bay LT2036WWHD Instrucciones De Ensamble E Instalación

5. Cabinet installation

NOTE: IT IS IMPERATIVE THAT UNIT BE FASTENED TO THE WALL FOR SAFETY REASONS (MOUNTING HARDWARE NOT INCLUDED).
Warning: Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing and gas lines.
Cutting any of these may cause serious injury. NOTE: We recommend mounting the cabinet directly into studs.
Place the cabinet body (B) in the desired position and place the sink basin (A) into cabinet body (B). NOTE: This is a snug
fit and the sink basin (A) may need to be worked into place. Press down on all four corners, making sure the sink basin (A)
is completely seated onto the cabinet body (B).
With the cabinet body (B) in the desired position, make sure the cabinet body (B) is level by adjusting feet (6).
After carefully removing the sink basin (A), insert wood shims (not included) between wall and cabinet body (B) until snug.
Attach cabinet body (B) to wall using appropriate mounting hardware (not included).
B
6
www.HOMEDEPOT.com IS2038
Pg 10 of 34