Glacier bay LT2036WWHD Instrucciones De Ensamble E Instalación página 13

8. Tub installation
Place a bead of silicone caulk/sealant (not included) around the top edge of the cabinet body (B), as shown.
Carefully set sink basin (A) into cabinet body (B). NOTE: This is a snug fit and the sink basin (A) may need to be worked into
place. Press down on all four corners, making sure the sink basin (A) is completely seated onto the cabinet body (B).
Insert screw caps (7) into exposed screw heads on the cabinet body (B).
Place bumpers (5) on doors (C) where they come in contact with the cabinet body (B).
Place hose guard with soap dish (E) into either side of the sink basin (A).
E
silicone caulk/sealant
(not included)
A
B
7
B
5
5
C
C
7
www.HOMEDEPOT.com IS2038
Pg 13 of 34