Faucet Installation - Glacier bay LT2036WWHD Instrucciones De Ensamble E Instalación

6. Faucet installation

NOTE: Faucet body (14) must be installed with the faucet handle on the right.
Install faucet body (14) and secure in place with locknuts (16). NOTE: Hand tighten locknuts (16).
Pass the faucet hose (13) through faucet body (14-A) and adjust the position of the faucet so that faucet hose (13) does
not rub against the edge of the sink hole.
Slide hose through hose weight (22-A) and nut (22-B) onto hose assembly, as shown.
Attach the faucet hose (13) onto the connecting pipe with washer (15) by turning connecting pipe with washer (15).
IMPORTANT: Be sure to hold plastic fitting of the faucet hose with a wrench while turning connecting pipe (15).
Attach faucet hose (13) to the faucet head (12). Tighten securely, DO NOT OVERTIGHTEN.
Attach the connecting pipe with washer (15) to the underside of the faucet body (14), by turning nut. Tighten securely while
keeping connecting pipe with washer (15) from turning and loosening. DO NOT OVERTIGHTEN.
NOTE: Confirm that connecting pipe is tight to
the faucet AND hose.
nut on underside of
faucet body (14)
two o-rings
connecting pipe with
washer (15)
wrench fitting location
faucet hose (13)
Pg 11 of 34
12
faucet shank
14
13
16
13
www.HOMEDEPOT.com
faucet handle
on the right
16
15
22-B
22-A
IS2038