Best IC34 Serie Manual Del Usuario página 13

NON-DUCTED INSTALLATION ONLY
Note:
a. Purchase Model ANKWC45 Non-ducted
Recirculation Kit from your local dealer.
b. Rooms with 10 or 11 foot ceilings require fl ue
extension model AEIC34SBN, available
from your local dealer. Discard the upper
flue supplied with the range hood and
replace it with the longer fl ue extension.
1. Install discharge collar supplied with the
range hood (Fig.15).
2. Attach the 6"-to-8" adapter to blower
discharge and tape joint with aluminum
duct tape (Fig.15).
3. Insert the plenum in the upper support
frame. Make sure that the letter F is
positioned at the front of the support frame
(Fig.16).
4. Install the plenum to the upper decorative
fl ue using (2) 3.9 x 9.5 mm screws provided
as shown (Fig.17).
5. Attach 6-inch expandable ducting to the
plenum and tape joint with aluminum duct
tape (Fig.18).
MOUNTING SCREWS
(3.9 x 9.5 mm Flat Head)
FIG. 17
- 13 -
FRONT
FIG. 15
FIG. 16
DUCT CON-
NECTOR
EXPANDABLE
DUCT
FIG. 18