Klarstein 10030308 Manual De Instrucciones página 19

Site
• Unpack the appliance carefully. Dispose of the packaging as described in chapter waste management.
• The accessories of your appliance can be protected from damage due to transportation (adhesive tapes etc.).
Remove such tapes very carefully. Remove remains of such tapes with a damp cloth using lukewarm water
and a mild detergent (see also chapter CLEANING AND MAINTENANCE). Never remove any components
of the back of the appliance!
• Install the appliance in a suitable position with an adequate distance from sources of heat and cold.
• Check that the appliance and the power cord are not damaged.
• Install the appliance in a dry and well-ventilated place.
• Protect the appliance from direct sunlight.
• The doors must open completely and without hindrance.
• Install the appliance on a level, dry and solid floor. Check the correct installation with a bubble level.
• Connect the appliance to the mains properly.
• The nameplate is inside the appliance or at the back.
Ventilation
Minimum distances required for proper ventilation:
Back <> wall
Right/left <> any piece of furniture/wall
Free space above
Doot opening angle
19
min. 10 cm
min. 10 cm
min. 30 cm
min. 160°