Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Tools Required
Gather the necessary tools and parts before starting the installation� Carefully follow the instructions with the
tools and parts required for installation�
•
Tape Measure
•
Flat-Head Screwdriver
•
Phillips Screwdriver
•
Level
•
Cordless Electric Drill
•
Hammer
•
Wrench or Pliers
•
Pipe Wrench
•
10" Adjustable Wrenches (2)
Parts Supplied
Check that all parts are included�
16 x 1-5/8"
Screws (2)
Depending on the thickness of flooring, longer screws may be required to anchor the anti-tip bracket to the sub
floor� Longer screws should be available at your local hardware store�
The anti-tip bracket must be securely mounted to the floor�
Parts Needed
Check local codes and consult gas supplier�
Adapter
•
•
•
•
•
•
•
•
Anti-Tip
Gas Pipe Adapter
Bracket
Flexible Gas Supply Line
3/8 Nut Driver
1/4 Nut Driver
1/8 (3�2mm) drill bit (wood floors)
Marker or Pencil
Masking Tape
Pipe-Joint Compound resistant to LP/NG
3/16" Carbide-Tipped Masonry Drill Bit (Concrete/Ceramic Floors)
Non-Corrosive Leak-Detection Solution
Regulator
with Washer
Gas Supply Line Kit
5
Figure 1
LP/Natural Gas
Conversion Kit
Figure 2
Adapter
Publicidad
Capítulos
Tabla de contenido
