Ubbink ROBOTCLEAN ACCU Manual De Uso página 3

1 Robotclean Accu Operating Instructions and Parts List
- The pool cleaner is only suitable for pools up to a size of app. 50 m2. Otherwise the cleaning effect may be compromised due to the limited capacity of the battery.
- The battery of the pool cleaner should be charged and discharged every three months when the appliance is stored for a longer period. Due to the battery discharging itself, the
battery charge can fall below the level of the over-discharge protective voltage, which damages the battery.
- The pool cleaner may only be powered with the original charging adapter supplied.
- Only charge the pool cleaner battery under the permitted conditions. When the battery is charged, the pool cleaner should be placed on a cool and dry surface to avoid damage to the
internal electric components due to overheating.
- Operating the pool cleaner outside water can lead to serious damage and to the expiry of the warranty.
- Do not leave the cleaner in the pool permanently and never expose the pool cleaner and charging adapter to high temperatures (heating, etc.) or weather conditions (rain, etc.).
- When the charging adapter or other pool cleaner parts are damaged they must be replaced to avoid endangerment.
- This appliance may be operated by children from the age of 8 years upwards and persons with reduced physical, sensory or mental capabilities, lack of experience and knowledge
when they are supervised or have been instructed in the safe handling of the appliance and understand the risks involved. Children must not play with the appliance. Children may
undertake cleaning and those service processes a user can carry out only when supervised.
- Keep small parts and packaging materials away from children. Danger of suffocation!
GENERAL OPERATING INSTRUCTIONS
The product is exclusively for private use and is not suitable for the commercial sector. The RobotClean Accu can be used for almost all commercially available pools with horizontal,
level floor. Use the appliance only as described in these operating instructions. Any other form of usage is considered as incorrect and can result in damage to property and people.
Ubbink Garden BV does not accept liability for damage resulting from improper or incorrect usage.

DO NOT ENTER THE SWIMMING POOL, WHEN THE CLEANER IS IN USE

SCHALTEN SIE DEN REINIGER NICHT EIN, WENN ER NICHT IM WASSER IST
CAUTION: Before using the cleaner remove all items from the pool, which could affect the performance of the cleaner.
CAUTION: After every use, take the cleaner out of the pool. Leaving the cleaner in the pool all the time may lead to additional need for servicing.
Design of the RobotClean Accu
Swing Flap
Schwingklappe
Driving Handle
There is an adjustable control nozzle on either side of the cleaner for propulsion in water. Sucked-in dirty water is filtered first and is then used to drive the pool cleaner via the control
nozzles. Both nozzles are adjustable to achieve the best cleaning result, depending on the shape and size of the pool.
SETTING THE CLEANING PATTERN
The cleaner has two control nozzles with an adjustable direction angle of 0 - 40°.
The pool cleaner moves at a nearly straight line when set at a nozzle angle of 0° - 0°
The pool cleaner moves at a more curved line when set at an angle of 0° - 40°.
The three settings below are recommendations.
The actual shape and size of the pool may require slightly different settings
of the control nozzles.
Jet Drive
Housing - Upper Part
Gehäuseoberteil
Filtereinsatz Filter Element
Housing - Lower Part
Gehäuseunterteil
Bürste
Brush
Setting 1: 0°/20° Standard setting for most pools.
Einstellung 1: 0°/20° Standardeinstellung für die meisten Pools.
Setting 2: 0°/40° when the pool cleaner does not fully cover the pool.
Einstellung 2: 0°/40° wenn der Poolreiniger das Becken nicht vollständig abdeckt.
Setting 3: 20°/20° for round pools. Einstellung 3: 20°/20° für runde Becken.
Öffnen und Schließen des Gehäuses