MSA AutoMaXX-ASE Guía Rápida página 2

Preparing the device
Switching off the device
 Before connecting the device to medium pressure, in
order to prevent accidental air delivery, push the
operating button to switch off the AutoMaXX.
Connecting the AutoMaXX
(1)
Press in securing clamp with a screw driver.
1 Securing clamp
(2) Mask-hood:
Insert AutoMaXX into the handwheel connector or the
handwheel of the PremAire Mask-Hood until it distinctly
snaps into place.
Full face mask:
Screw AutoMaXX with handwheel into the full face mask..
(3) Don mask-hood/full face mask and carry out leak test (see
operating manual for PremAire Escape.).
Putting the AutoMaXX into operation
To activate, inhale once forcefully or push flush button.
Switching off the AutoMaXX
To switch off, push operating button until stopper.
Removing the AutoMaXX
(1) Switch off AutoMaXX-ASE by pushing the red operating
button.
(2) Unscrew handwheel and separate AutoMaXX from the
mask-hood/full face mask.
GB
1
Order No.: 10161805/00