Description - Southwire Triggers TSS-01 Instrucciones De Operación

Description

The Triggers dual remote foot pedal system is designed for power
®
control and safety for all your cable pulling and feeding applications.
The person operating the puller and the person feeding the wire both
have control over the puller's motor. All of this is accomplished by
simply pressing down or lifting off the Triggers foot pedal. Both foot
pedals must be engaged in order for the puller motor to operate. Any
time either foot pedal is released, the puller motor will stop. The
Triggers Master and Remote units may also be used as standalone foot
pedals if desired, requiring only one operator to run the cable puller or
feeder's motor. Communication between units is wireless. Triggers
®
foot switches will continue communication up to 1500 feet between
walls and obstructions and up to 3.7 miles line of sight. The Triggers
units are equipped with a series of lights indicating the units are in
range or that one pedal is depressed and the other is not. This helps to
decrease the chance of miscommunication during a wire pull.
2