Purpose Of This Manual - Southwire Triggers TSS-01 Instrucciones De Operación

Safety cont.
WARNING:
• Do not expose power tools to rain or wet conditions. Water entering a
power tool can increase the risk of electric shock.
• Do not place Triggers in standing water.
• Plug into a (GFCI) ground fault interrupted circuit outlet only.
• Use a 10 gauge 20 Amp 120 Volt extension cord.
• Maintain proper care of power cords. Do not use the cord to carry the tool
or pull the plug from an outlet. Replace damaged cords immediately.
Damaged cords can increase the risk of electric shock.
• Do not use this tool near live circuits. Shut off and lock out power when
working near existing circuits.
WARNING:
• Do not open or disassemble battery pack.
• Do not expose to fire or open flame.
• Do not mix batteries of varying sizes or chemistries or types.
• Do not puncture, deform, incinerate, or heat or use in environments
above 85°C or 194°F.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT

Purpose Of This Manual

This instruction manual is intended to familiarize personnel with the
safe operation for the Southwire
System. Keep this manual available to all personnel. Replacement
manuals are available upon request at no charge at
www.southwiretools.com.
Electric Shock Hazards
Battery Pack
IN SEVERE INJURY OR DEATH.
Triggers Wireless Safety Switch
™ ®
4