Operation with UP Sensors
-
in the case of FM Sensors 6800-xxx-104(M), for the
time set on the FM Sensor
Active Extension Operation (Busch Watchdog®) via Insert
6805U-xxx and FM Sensors:
Since the master and the extension each have a separate
setting for the dusk value, the actual brightness conditions
at the installation site can be individually taken into
account.
The effective overtravel time is calculated by adding the
times of the master and extension together. In the case of
FM Sensors 6800-xxx-104(M), it is recommendable to
operate the extensions with the time-setting short-time
impulse
if the times set at the master should be adhered
to as precisely as possible.
-
Switching on and dimming are not
possible via theextension.
-
Repeated action when the lighting is
switched on leads to "retriggering" of the
set time.
ENG
63