Whittier Wood Products Westport 537Wb Instrucciones Para Armar página 5

Fig. 5a
5. Lay the unit face down and measure from top left to bottom right and from top right to bottom left.
If the unit is square, the measurements will be equal. If one is longer, tap the bottom of the side panel
on the longer side until the measurements are equal. See Figure 5a.
Place the Back (Fb) on the unit. The top and back legs are grooved to position the back.
Attach the back with 18 #6 x 5/8" Philtruss Screws (L) through the predrilled holes into the top,
each side assembly and bottom shelf. See Figure 5b.
6. Turn the bench upright.
L
Fb
Fig. 5b
L
537Wb — Page 5 — 03/10