Publicidad
STEP 4
Screw the sliding pin into the
frame using the provided
M5x14 screws so the pin is on
the hinge side of the pantry
frame (See Fig 4A). Insert the
frame into the pantry, ensuring
the sliding pin attaches to the
lateral slide and the (4) holes
at the bottom of the frame
line up with the (4) holes on
the bottom slide. Attach the
frame to the bottom slide with
2
Installare la guida laterale C sul fianco del mobile, rispettando
the provided (4) M6x40 screws
le quote.
(See Fig 4B).
Install the lateral slide C on the side cabinet respecting the
quotes.
Installez la coulisse latérale C dans la côté du meuble et re-
spectez les cotes.
Instalar la guía lateral C en el lado del mueble siguiendo las
medidas.
4 MM
#2
STEP 5
NOTE: If you have a solid
panel door, skip this step and
proceed to step 6.
Use the measurements in
Figure 5A to determine the
hole locations for both top and
bottom extension brackets.
Then attach your extension
bracket using #8x5/8" flathead
screws (See Fig 5B).
#2
#2
INSTALLATION INSTRUCTIONS: 5374 SERIES SWING OUT PANTRY
LEFT
4
Inserire il Telaio A e fissarlo tramite 4viti M6x40 (vedi immagine).
Insert the frame A and fix it by using the four screws M6x40, as
FIGURE 4A
per related picture.
M5X14 SCREWS
LEFT
SIDE
HINGES
LEFT
M5X14 SCREWS
59-7/8"
(1521 MM)
FIGURE 4B
RIGHT
RIGHT
SIDE
CABINET 300/400
HINGES
MAX 120°
N°4 4x16
M6X40 SCREWS
FIGURE 5A
Optional bracket
CABINET DOOR
1-1/8"
(29 MM)
CENTER
BRACKETS
HORIZONTALLY
1-1/8"
(29 MM)
FIGURE 5B
RIGHT
N°4 M6x40
120
120°
°
Optional
Optional bracket
Optional bracket
Optional bracket
HINGE SIDE
Optional bracket
1-3/4"
(44 MM)
Optio
Optional b
3
Publicidad
