Kohler K-922 Guia De Instalacion página 12

Apply sealant.
Stud
Drip Tray
Notch
Setscrews
8. Install the Drip Tray and Screen
Verify that the studs are positioned and tightened correctly.
Apply a bead of silicone caulk sealant around the base of each
drip tray mounting stud.
Slide the drip tray onto the mounting stud until it is flush to the
finished wall, and tighten with the two setscrews.
To install the screen in the drip tray, locate the notch on the
bottom edge of the screen. Align the notched end of the screen to
the front edge of the block.
Gently press the screen until it fits into the groove in each side of
the drip tray.
1006741-2-F 12 Kohler Co.