Kohler K-922 Guia De Instalacion página 3

Before You Begin (cont.)
A water hammer arrestor is recommended in ceiling mounted
applications using a high flow, deck mounted valve. Kohler
recommends that a Sioux Chief 6521-A-DD arrestor be located
near the outlet side of the valve. Contact Sioux Chief at
1-800-821-3944 or www.siouxchief.com.
For ceiling mount applications, the height from the bottom of the
bath to the spout should not exceed 9' (2.7 m).
In applications where excessive air could enter the water supply,
install an air separator.
When a deck mounted transfer valve (K-408-K or K-409-K) is
used for a ceiling mount, install a check valve between the spout
and the diverter.
Remove the mounting sleeve and cartridge before installing the
spout body.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Kohler Co. 3 1006741-2-F