Troubleshooting; Need Help; Storage & Cleaning - Fellowes Venus 2 125 Guia De Inicio Rapido

TROUBLESHOOTING

Problem
No glowing 'blue' Power on LED Machine not switched on
Pouch does not completely seal
the item
Pouch is lost in the machine
Pouch is damaged after
lamination

NEED HELP?

L
www.fellowes.com
Customer Service...
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
STORAGE & CLEANING
Turning off the Machine – If the top power button is pushed, the machine will go into cool-down mode. The heaters will
turn off, but the rollers will still run until the unit reaches the desired temperature to turn off completely. This functionality
machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning
sheets can be purchased for use with the machine. When the machine is warm – run the sheets through the machine to
clean any residue off the rollers. For optimum performance, it is recommended that cleaning sheets are used with the
6
Possible cause
Item may be too thick to laminate
Pouch was inserted open end first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used
Damaged rollers or adhesive on rollers
Damaged rollers or adhesive on rollers
Solution
Switch on machine at right rear side and at
wall socket. Press power standby button.
Pass through laminator a second time.
Machine will automatically reverse the
hold reverse button while pulling on pouch
to completely remove pouch.
Pass cleaning sheets through the machine to
test and clean rollers