Troubleshooting; Need Help; Storage & Cleaning - Fellowes Jupiter 2 125 Guia De Inicio Rapido

TROUBLESHOOTING

Problem
No glowing 'blue' Power on LED
Pouch does not completely seal
the item
Pouch is lost in the machine
Pouch is damaged after lamination Damaged rollers or adhesive on rollers

NEED HELP?

L
www.fellowes.com
Customer Service...
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
STORAGE & CLEANING
Turning off the Machine – If the top power button is pushed, the machine will go into cool-down mode. The heaters will turn off, but
the rollers will still run until the unit reaches the desired temperature to turn off completely. This functionality reduces long term wear
or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm
– run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning
6
Possible cause
Machine not switched on
Item may be too thick to laminate
Pouch was inserted open end first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used
Damaged rollers or adhesive on rollers
Solution
Switch on machine at right rear side and at wall
socket. Press power standby button
through laminator a second time
Machine will automatically reverse the document.
while pulling on pouch to completely remove
pouch.
Pass cleaning sheets through the machine to test
and clean rollers