Lcd Features - Numark CDN55 Guia De Inicio Rapido

LCD FEATURES

1. PLAY – Active while the unit is actually
playing a CD.
2. PAUSE – Active when the unit is paused.
3. TRACK – Shows the current track that
the unit is playing.
4. SINGLE – Shows when the unit is set to
Single Play Mode (one track at a time).
This function is controlled by the SGL
button.
5. CONTINUOUS – Shows when the unit is
set to Continuous Play Mode (the CD will
play continuously through all tracks). This function is controlled by the SGL button.
6. TIME BAR – Shows either time remaining or elapsed depending on the setting of the TIME BUTTON.
7. REMAIN – Indicates when the remaining track time is displayed.
8. TOTAL – Indicates when the remaining CD time is displayed
9. PITCH – Shows the percentage change in pitch.
10. MINUTES – Shows the minutes elapsed or remaining depending on mode setting.
11. SECONDS – Shows the seconds elapsed or remaining depending on mode setting.
12. FRAMES – The CD player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode setting.
13. SEARCH – Indicates when the unit is searching through music (controlled by the SEARCH button).
PLAY, PAUSE & CUE OPERATIONS
PLAY & CUE
Pressing the "PLAY/PAUSE"
button starts the disc. Pressing
the "CUE" button will reset the
disc to the last place where the
disc was started. This is called
the cue point. By alternately
pressing the "PLAY/PAUSE"
button and the "CUE" button,
the disc may be returned and
played from the cue point any
number of times. This function
is called back cue.
PLAY, PAUSE & CUE
When play has been paused
and then started again, the
return position for the back cue
will be updated to this new
position.
EDITING CUE POINT
When the JOG WHEEL is
turned while paused at the cue
point, it will move the cue point.
You will hear the track's audio
as the player "scrubs" through
the track until you find where
you want to set your new cue
point. Press "PLAY/PAUSE"
then "CUE" to confirm the new
cue point.
Press "PLAY/PAUSE"
to start music
Press "PLAY/PAUSE"
to start music
Play Interval
Adjust the "CUE" point
with the jog wheel
Press "PLAY/PAUSE"
to start music
Press "CUE" return to
last starting point
Play Interval
Back Cue Operation
Press "PLAY/PAUSE" Press "PLAY/PAUSE"
to pause music to start music
Press "CUE" return to
last starting point
Play Interval
Back Cue Operation
5
Position on Disc
Press "CUE" return to
last starting point
Play Interval
Back Cue Operation
Position on Disc
Position on Disc