Light Kit Fitter Assembly - Home Decorators Collection 7984HDCAN Guía De Uso Y Cuidado

Assembly - Attaching the Accessories (continued)
2
Attaching the light kit fitter assembly
□
Remove one screw (MM) from the light kit pan (I), and loosen,
but do not remove the other two screws.
□
Connect the wires from the light kit fitter assembly (K) to
the wires from the fan motor assembly (E) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
□
Push the light kit fitter assembly (K) up to the light kit pan
(I) so that the two loosened screw heads fit into the keyhole
slots. Turn the light kit fitter assembly (K) clockwise to secure.
□
Re-install the screw that was removed in the first step.
□
Make sure all the screws are firmly tightened.
3
Installing the shade
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
Place the glass shade (J) into the light kit pan (I), aligning the
three flat areas in the top of the glass shade (J) with the three
raised dimples in the light kit pan (I). Turn the glass shade
clockwise until it stops.
I
J
12
E
I
K
MM