Brandson Equipment 303847 Manual De Usuario página 27

No.
1
2
3
4
5
5. Installation
Take the appliance out of the package and remove all the packaging material. Then
check the product for any damage. Place the heater on a flat surface. The heater
has to be placed at least 1 m away from other objects and should not be kept
directly under a socket.
Caution! Make sure that the appliance is not placed near flammable materials or
any liquids. The air outlet should also not point in this direction.
Note: To ensure that the heater works and heats properly, the desired temperature
must be set on the heater so that it is a couple of degrees higher than the room
temperature. If the heater does not start heating, increase the desired temperature
to activate the heating elements.
English
Description
Temperature controller
Power setting controller
Power lamp
Heating elements
Housing
27