Appendix A - Specifications - Philips 105S63 Instrucciones De Operación

APPENDIX A - SPECIFICATIONS

CRT(Picture Tube)
Viewable Image Size
Display Color
Analog input
Input Signal
Video
Sync.
Synchronization
Horizontal
Vertical
Max. Resolution
Video bandwidth
Factory Preset Timings :
User mode Timings :
Misconvergence
Center
Corner
Power Source
Operating
Humidity
Weight
Dimensions
Monitor
Signal Cable
External Controls:
Switch
Philips_manual_
Tuesday, November 18, 2003 3:00:46 PM
38cm(15"), 90º deflection, 29mm neck,
0.28mm dot pitch glare screen.
35.6cm (14"), diagonal
Unlimited colors
All timing that meets scanning frequencies
Specification
Analog R, G, B 0.7Vpp positive/75 ohm
Horizontal sync. : Positive/Negative
Vertical sync. : Positive/Negative
30kHz to 54kHz automatically
50Hz to 120Hz automatically
1024×768
72MHz
6
9
0.3mm Max.
0.4mm Max.
Switching mode power supply
AC 100-240V, 50Hz/60Hz full range
0°C to 40°C ambient
10% to 85% relative, non-condensing
11.5kg(Net)
360(W) × 362(H) × 387(D)mm
15 pin mini D-Sub
POWER SWITCH
MENU KEY
CONTRAST/UP KEY
BRIGHTNESS/DOWM KEY
EXIT KEY
11