Attaching The Fan Blades - Home Decorators Collection 91144 Guía De Uso Y Mantenimiento

Assembly - Attaching the Fan Blades
2

Attaching the fan blades

NOTE: Your fan features revolutionary advancements
for quick and easy blade installation.
□
Mount the fan blades (G) to the blade bracket (H) by aligning
the three key-slot holes in the blade (G) with the three posts
on the top of the blade brackets (H).
□
Hold the blade (G) close to the blade bracket (H) and press
the blade (G) down firmly. Ensure the key-slot holes are
properly seated on the blade arm posts.
□
While still holding the blade (G) down, firmly slide the
blade (G) away from the bracket (H) side until the blade (G)
engages in the locking mechanism (GG).
E
Assembly - Attaching the Light Kit
1
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the light kit fitter
assembly (F).
□
Connect the wires exiting the bottom of the motor assembly
(E) by connecting the molded adaptor plugs together (blue to
blue, white to white).
□
Slide the light kit (F) and secure it to the switch housing
using the three screws (QQ) that were removed in the first
step.
□
Make sure the locking mechanism (GG) at the rear of the blade
bracket (H) springs upward and butts against the edge of the
blade (G) indicating a secure connection.
□
Visually inspect the top of the blade bracket (H) to ensure the
locking mechanism (GG) is securely in place.
□
Repeat for the remaining blades (G).
GG
H
13
F
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
G
E
QQ