Ingeteam
A1
B1
The order of the INGECON EMS Manager potential free contacts is established by the user.
Power supply
The INGECON EMS Manager is powered from the power supply that is supplied with it. This must be connected to
230 VAC.
2.5. LEDs
The front of the unit includes four LEDs.
w
z
x
y
32
L
N
External contactor in
Charge
A0
B0
Consumption grid
storage systems
LED w (red).
Permanently lit to indicate that the INGECON EMS
Manager is powered.
LED x (green).
Indicates activity via the Ethernet.
LED y (green).
With a steady light indicating that all system devices are
operating.
With a blinking light indicating that some devices do
not respond to the INGECON EMS Manager settings (for
example, night).
LED z (blue).
Internal indications.
AAX2022IQM01_ - Installation and Operation Manual
Unit description