HP Photosmart Premium series - C309
1
Unpack and remove all tape
2
Power on
Connect the power cord and adapter.
Important!
Do NOT connect the USB cable until prompted by the software!
3
Follow the Setup Wizard
Be sure to follow the instructions on
the product display as it guides you
through setting up and connecting the
HP Photosmart.
For computers without a CD/DVD drive, please go to
www.hp.com/support to download and install the
software.
Printed in [English]
Printed in [French]
© 2009 Hewlett-Packard Development Company, L.P.
English?
Yes
No
W i r e l e s s
W i r e l e s s
Printed in [Spanish]
W i r e l e s s
W i r e l e s s
Apply sticker to printer.
Press
to turn on the HP Photosmart.
This device supports WiFi Protected Setup (WPS)
for easy one-button wireless setup.
• If you have a WPS enabled router, push the
WPS button on the router at any time during
setup to connect. The wireless LED on the printer
will turn on if the connection is successful.
• If your router does not support WPS or have a
WPS button, follow the directions in the Setup
Wizard to setup your network connection. Refer
to your router's documentation for additional
information.
*CD054-90056*
*CD054-90056*
CD054-90056
W i r e l e s s
W i r e l e s s