Lock Mode - Hammerhead HLCL01 Manual Del Usuario

OPERATION

5. LOCK MODE

This mode cannot be used to perform horizontal or vertical leveling, because the laser lines
are no longer self leveling. In this mode, the LED indicator will always illuminate in red.
a. Keep the power switch in the "OFF" position and press the mode button to turn on
the laser. The laser lines are now locked, and are no longer self-leveling.
b. Press the mode button repeatedly to change the laser-projection mode.
c. Slope your compact self-leveling cross line laser to project a straight line for
reference. In this mode, the laser lines are projected continuously and will not blink,
even if the slope angle exceeds 4°.
d. To turn the laser off, press the mode button repeatedly until the laser shuts off.
6. USING WITH THE CLAMP
The highly versatile clamp allows your
compact self-leveling cross line laser
to work in more applications, such as
mounted on a water pipe, banister, etc.
a. Securely clamp the clamp to a
pole, pipe or other suitable item.
b. Loosen knob 1 and adjust the
1/4" screw platform to the desired
position. After adjustment, tighten
knob 1.
COMPACT SELF-LEVELING CROSS LINE LASER WITH CLAMP
6a
6b
2 1/4 in.
KNOB 1
9