Lock Mode - Hammerhead HLCL02 Manual De Instrucciones

OPERATION

4. LOCK MODE

This mode cannot be used to perform horizontal or vertical leveling, because the
laser lines are no longer self leveling.
a. To choose the lock mode, rotate the leveling mode ring until the indicator
aligns with "
The laser lines are now locked, and are no longer self-leveling. Slope your
self-leveling cross line laser to project a straight line for reference. In this
mode, the laser lines are projected continuously, even if the slope angle
exceeds 4°.
b. To turn the laser off, depress the power switch.
5. APPLICATIONS
Your compact self-leveling cross line laser can be hand-held for point marking
and simple alignment by sight, or it can be used to make a "chalk line" using the
lock mode. It is ideal for the following applications:
• Hanging pictures, photos, or artwork on walls
• Wallpapering and stencil work
• Framing doors and windows
• Installing electrical wiring and pipes
• Mounting wall fixtures, electrical outlets, switches and lighting
• Installing a drop ceiling
• Painting
• Installing closets
• Laying tile and flooring
10
" mark. Turn the tool on by depressing the power switch.
COMPACT SELF-LEVELING CROSS LINE LASER WITH TRIPOD STAND