Maintenance - Hammerhead HLCL01 Manual Del Usuario

OPERATION
7. APPLICATIONS
Your compact self-leveling cross line laser can be hand-held for point marking and simple
alignment by sight, or it can be used to make a "chalk line" by using the lock mode. It is
ideal for the following applications:
• Hanging pictures, photos, or artwork on walls
• Wallpapering and stencil work
• Framing doors and windows
• Installing electrical wiring and pipes
• Mounting wall fixtures, electrical outlets, switches and lighting
• Installing a drop ceiling
• Painting
• Installing closets
• Laying tile and flooring

MAINTENANCE

This compact self-leveling cross line laser has been designed to be a low-maintenance
tool.
However, in order to maintain its performance, you must always follow these simple
directions:
a. Avoid exposing the tool to shock, continuous vibration or extreme hot or cold
temperature.
b. Always store the tool indoors.
c. Always keep the tool free of dust and liquids. Use only a clean, soft cloth for
cleaning. Avoid using any solvents.
d. Do not disassemble the compact self-leveling cross line laser; this will expose the
user to hazardous radiation exposure.
e. Do not attempt to change any part of the laser lens.
f. Remove the batteries from the tool and store them in a cool dry location.
g. After you have finished using the tool, always make sure that the switch is in the off
position.
COMPACT SELF-LEVELING CROSS LINE LASER WITH CLAMP 11