Stopping the Engine
Ordinary Stop
•
Move throttle lever to "SLOW" position.
•
Keep running at the "SLOW" speed for about one
minute.
NOTICE
Engine damage can occur from run-on or
after-burning if engine is stopped suddenly
from high speed loaded operation. Reduce
engine speed to idle for one minute before
shutting engine off.
•
Turn the ignition switch to "OFF" position.
Emergency Stop
•
Immediately turn the ignition switch to "OFF" posi-
tion.
•
Close the fuel valve on the equipment.
WARNING
Leaving the equipment with the key hanging
in the ignition can allow operation by some-
one who does not know how to operate it. It
may cause serious accident with injury. Al-
ways remove the key from unattended equip-
ment.
STOPPING
STOPPING 21