Dash Disassembly - Metra 99-8242G Instrucciones De Instalación

Note: This vehicle is equipped with
a vehicle customization menu in the
radio. Use the factory radio screen
to set these vehicle settings as
desired prior to radio removal and
they will stay as they were set.
1. Unclip and remove the trim
panel above the radio across the
passenger side. (Figure A)
2. Unsnap and remove the vents from
either side of the factory radio.
(Figure B)
3. Unsnap the hazard/screen
assembly above the factory radio
and move aside (not necessary to
unplug). (Figure C)
4. Remove (4) 10 mm bolts securing
the factory radio.
5. Remove (4) clips from
factory radio trim panel and save
for kit assembly.
Continue to kit assembly

Dash Disassembly

(Figure A)
99-8242G
(Figure B)
2
(Figure C)