Tabla de contenido
Publicidad
Step 4
Carefully stand your unit upright.
å
For full size beds, fasten your bedframe to the LOWER SUPPORT (C). Use four SILVER 2" BOLTS (94S) through your
å
bedframe and LOWER SUPPORT. Use four WASHERS (13M) and tighten four NUTS (24M) onto the ends of the BOLTS.
For queen size beds, fasten the HEADBOARD BRACKETS (42G) to the LOWER SUPPORT (C). Use four SILVER 2"
å
BOLTS (94S), four WASHERS (13M) and four NUTS (24M). Then, attach your bedframe to the HEADBOARD
BRACKETS (42G). Use four BLACK 1-1/4" MACHINE SCREWS (93S), four WASHERS (13M), and four NUTS (24M).
NOTE: Your bedframe must be attached to the headboard as indicated in this step. Notice the HEADBOARD
å
BRACKETS (42G) are positioned diff erently on each side.
Center a SCREW COVER (18P) over the head of each SCREW in the LEGS (B) and gently tap in with your hammer.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
B
Page 8
24M
13M
C
42G
18P
B
42G
421933
(12 used)
93S
BLACK 1-1/4" MACHINE SCREW
(4 used in this step)
13M
WASHER
(8 used in this step)
24M
NUT
(8 used in this step)
94S
SILVER 2" BOLT
(4 used in this step)
www.sauder.com/services
Publicidad
Tabla de contenido
