Jocel DF-150A7-7 Manual Del Usuario página 16

 The removal regulations for oil after the product is abandoned must be
obeyed.
 According to relevant security clauses, the minimum distance between the
machine and floor as well as walls should be at least 150mm.
 If power cord, plug cap or other connection accessories are not available for
the heat abstractor, corresponding ones should be added according to the
installation instructions during installation.
 When the machine is not to be used, close the switch firstly and then cut off
the power (pull out the power plug).
 When moving or cleaning the machine, do pull out the power plug. When
disconnecting the machine, close the switch firstly and then pull out the plug by
seizing it. Never suddenly pull the power cord.
 To avoid current overload, please do not use the same socket with other
electric appliances so that fires caused by overload can be prevented.
 Warning: to avoid overheating, it is forbidden to cover the heat abstractor with
any objects so as to prevent unexpected risks.
 The oil heater should be placed horizontally and cannot be reversed during the
operation.
-15-