Steren COM-820 Manual De Instrucciones página 20

- Default Gateway - (Optional) Enter the gateway IP address in
dotted-decimal notation provided by your ISP.
- MTU Size - The normal MTU (Maximum Transmission Unit)
value for most Ethernet networks is 1500 Bytes. For some ISPs
you may need to modify the MTU. But this is rarely required, and
should not be done unless you are sure it is necessary for your
ISP connection.
- Primary DNS - (Optional) Enter the DNS address in
dotted-decimal notation provided by your ISP.
- Secondary DNS - (Optional) Type another DNS address in
dotted-decimal notation provided by your ISP if provided.
If you are also given a user name and a password for 802.1x
authentication, you should select 802.1x + Static IP for WAN
Connection Type, a box will then appear requesting a user name
and a password, shown in fi gure 17:
Fig. 17
- User Name - Enter the user name for 802.1x authentication
provided by your ISP
- Password - Enter the password for 802.1x authentication
provided by your ISP.
Click Login to start 802.1x authentication.
Click Logout to end 802.1x authentication.
ENGLISH-20