Steren COM-820 Manual De Instrucciones página 75

i. Sometimes the connection cannot be i. Sometimes the connection cannot be
disconnected although you specify a time to Max disconnected although you specify a time to Max
Idle Time, since some applications is visiting the Idle Time, since some applications is visiting the
Internet continually in the background. Internet continually in the background.
ii. If you are a Cable user, please confi gure the router ii. If you are a Cable user, please confi gure the router
following the above steps. following the above steps.
2. How do I confi gure the router to access Internet by
Ethernet users?
1) Login to the router, click the "Network" menu on the
left of your browser, and click "WAN" submenu. On the
WAN page, select "Dynamic IP" for "WAN Connection
Type", fi nish by clicking "Save".
2) Some ISPs require that you register the MAC Address
of your adapter, which is connected to your cable or DSL
modem during installation. If your ISP requires MAC
register, login to the router and click the "Network" menu
link on the left of your browser, and then click "MAC
Clone" submenu link. On the "MAC Clone" page, if your
PC's MAC address is proper MAC address, click the
"Clone MAC Address" button and your PC's MAC
address will fi ll in the "WAN MAC Address" fi eld. Or else,
type the MAC Address into the "WAN MAC Address"
fi eld. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the "Save" button. It
will take effect after rebooting.
ENGLISH-75