Steren COM-820 Manual De Instrucciones página 47

Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
When the trigger connection is released, the according When the trigger connection is released, the according
opening ports will be closed. opening ports will be closed.
Each rule allowed to be used only by one host on LAN Each rule allowed to be used only by one host on LAN
synchronously. The trigger connection of other hosts on synchronously. The trigger connection of other hosts on
LAN will be refused. LAN will be refused.
Incoming Port Range cannot overlap each other. Incoming Port Range cannot overlap each other.
DMZ
The DMZ host feature allows one local host to be exposed to the
Internet for a special-purpose service such as Internet gaming or
videoconferencing. DMZ host forwards all the ports at the same
time. Any PC whose port is being forwarded must have its DHCP
client function disabled and should have a new static IP Address
assigned to it because its IP Address may change when using
the DHCP function. You can set up DMZ host on this page:
Fig. 38
To assign a computer or server to be a DMZ server:
Click the Enable radio button
Enter the local host IP Address in the DMZ Host IP Address fi eld
Click the Save button.
After you set the DMZ host, the fi rewall related to the host will After you set the DMZ host, the fi rewall related to the host will
not work. not work.
ENGLISH-47