Steren COM-820 Manual De Instrucciones página 57

To add or modify a MAC Address Filtering entry, follow
these instructions:
1. Enter the appropriate MAC Address into the MAC Address
fi eld. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X
is any hexadecimal digit). For example: 00-0E-AE-B0-00-0B.
2. Type the description of the PC in the Description fi eld. Fox
example: John's PC.
3. Status - Select Enabled or Disabled for this entry on the
Status pull-down list.
4. Click the Save button to save this entry.
To add additional entries, repeat steps 1 to 4.
When fi nished, click the Return button to return to the MAC
Address Filtering page.
To Modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Edit column.
Click the Enable All button to make all entries enabled.
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the
Previous button to return to the previous page.
Fox example: If you want to block the PCs with MAC addresses
00-0A-EB-00-07-BE and 00-0A-EB-00-07-5F to access the
Internet, fi rst, enable the Firewall and MAC Address Filtering
on the Firewall page, then, you should specify the Default MAC
Address Filtering Rule "Deny these PCs with effective rules to
access the Internet" on the Firewall page and the following MAC
address fi ltering list on this page:
Fig. 50
ENGLISH-57