Steren COM-820 Manual De Instrucciones página 50

FIREWALL
Using the Firewall page (shown in fi gure 41), you can turn the
general fi rewall switch on or off. The default setting for the switch
is off. If the general fi rewall switch is off, even if IP Address
Filtering, DNS Filtering and MAC Filtering are enabled, their
settings are ineffective.
Fig. 41
- Enable Firewall - the general fi rewall switch is on or off.
- Enable IP Address Filtering - set IP Address Filtering is enabled
or disabled.
There are two default fi ltering rules of IP Address Filtering, either
Allow or Deny passing through the router.
ENGLISH-50