Keep Warm; Memory; Environment; Warning Display - Jocel BM1309-B Manual De Instrucciones

All manuals and user guides at all-guides.com
LIGHT (LUZ)
Press the button once, the lighting lamp will be illuminated to expediently view the operation.
Within 1minutes, if you press the button again, the lighting lamp will be extinguished. After 1
minute, doesn't need press the button, the lamp will be extinguished automatically.

KEEP WARM

Bread can be automatically kept warm for 60 minutes after baking. During keeping warm, if
you would like to take the bread out, switch the program off by pressing the START/STOP
(INICIAR/PARAR) button.

MEMORY

If the power supply has been interrupted during the course of making bread, the process of
making bread will be continued automatically within 10 minutes, even without pressing
START/STOP (INICIAR/PARAR) button. If the interruption time exceeds 10 minutes, the
memory cannot be kept, you must discard the ingredients in the bread pan and add the
ingredients into bread pan again, and the bread maker must be restarted. But if the dough has
not entered the rising phase when the power supply breaks off, you can press the
START/STOP (INICIAR/PARAR) directly to continue the program from the beginning.

ENVIRONMENT

The machine may work well in a wide range of temperature, but there may be any difference
in loaf size between a very warm room and a very cold room. We suggest that the room
temperature should be within the temperature of 15 ºC to 34ºC.

WARNING DISPLAY:

1. If the display shows "H HH" after you have pressed START/STOP (INICIAR/PARAR)
button, the temperature inside is still too high. Then the program has to be stopped. Open the
lid and let the machine cool down for 10 to 20 minutes.
2. If the display shows "E E0" or "E E1"after you have pressed START/STOP
(INICIAR/PARAR) button, the temperature sensor is malfunction please check the sensor
carefully by Authorized expert.

BEFORE THE FIRST USE

The appliance may emit a little smoke and a characteristic smell when you turn it on for the
first time. This is normal and will soon stop. Make sure the appliance has sufficient
ventilation.
1. Please check whether all parts and accessories are complete and free of damage.
2. Clean all the parts according to the section "CLEANING AND MAINTENANCE".
3. Set the bread maker on BAKE mode and bake empty for about 10 minutes. Then let it cool
down and clean all the detached parts again.
4. Dry all parts thoroughly and assemble them, the appliance is ready for using.
- 39 -