Klarfit Adjustabell Manual De Instrucciones página 6

EN
6
Release the levers after you have completed the weight selection. The
adjustment saucer jumps off.
Important Notes
Note: Do not turn the lever during training to adjust weights. When
adjusting weights, the bar must be placed on a flat and stable surface.
If the adjustment saucer is in the
locking position, you should not be
able to see the inner lever (yellow).
If the inner lever is visible, adjust
the outer lever slightly and the
adjustment saucer will jump off.
3
To readjust the weights, the bar must
be reattached to the adjustment
saucer. At the end of the exercise,
place the bar back on the adjustment
saucer and select the heaviest
weight to fix the bar.