Safe Operation; Installation And Connection; Remedy Of Faults - Oase InScenio FM 1 Instrucciones De Uso

Pos: 86 /Alle Produkte/Überschriften/H2 Sicherer Betrieb @ 7\mod_1204022429287_121.doc @ 44671 @

Safe operation

Pos: 87 /Alle Produkte/Sicherheit/Sicherer Betrieb/SIC ERW Betrieb - Vor Feuchtigkeit und Regen schützen @ 14\mod_1260802382987_121.doc @ 88239 @
− Protect the unit from moisture and rain.
Pos: 88 /Alle Produkte/Sicherheit/Sicherer Betrieb/SIC ERW Betrieb - Nicht zum vollständigen Abschalten geeignet. @ 15\mod_1264590894272_121.doc @ 95567 @
− The unit is not suitable for completely isolating the units connected to it.
Pos: 89 /Alle Produkte/Sicherheit/Sicherer Betrieb/SIC BAS Betrieb @ 11\mod_1250507406044_121.doc @ 69397 @
− Never operate the unit if either the electrical cables or the housing are defective!
− Do not carry or pull the unit by its electrical cable.
− Route all cables such that damage is excluded and nobody can trip over them.
− Never open the unit housing or its attendant components, unless this is explicitly required in the operating
instructions.
− Only use original spare parts and accessories for the unit.
− Never carry out technical modifications to the unit.
− Only have repairs carried out by customer service points authorised by OASE.
Pos: 90 /Alle Produkte/Überschriften/H1 Aufstellen und Anschließen @ 11\mod_1251356800420_121.doc @ 71354 @

Installation and connection

Pos: 91 /Alle Produkte/Inbetriebnahme/Text_norm: So stellen Sie die Stromversorgung her @ 14\mod_1260347842800_121.doc @ 86495 @
This is how to connect the power supply:
Pos: 92 /Gartentechnik/InScenio FM 1/Stromversorgung herstellen InScenio FM 1 @ 14\mod_1260791157904_121.doc @ 87940 @
− Insert the speed controller into the socket.
− Observe the specified safety distance of the unit from the water (B).
− Insert the plug of the pump connection cable into the speed controller.
Pos: 93 /Alle Produkte/Dummy_module/Abstand 3pt @ 11\mod_1251901846864_0.doc @ 72826 @
Pos: 94 /Alle Produkte/Aufstellen/Text_Norm: So montieren Sie die Halterung für den Handsender @ 14\mod_1261121943324_121.doc @ 89083 @
Proceed as follows to fit the holder for the hand-held transmitter:
Pos: 95 /Gartentechnik/InScenio FM 1/Halterung für Handsender montieren @ 14\mod_1261122144840_121.doc @ 89110 @
− Take the hand-held transmitter (C, 2) out of the holder (3).
− Screw the holder (3) e.g. to an indoor wall using the enclosed screw (4).
Pos: 96 /Alle Produkte/Dummy_module/Abstand 6 pt @ 7\mod_1196627997106_0.doc @ 41651 @
Pos: 97 /Alle Produkte/Überschriften/H1 Bedienung @ 7\mod_1196625148604_121.doc @ 41443 @
Operation
Pos: 98 /Alle Produkte/Dummy_module/Abstand 3pt @ 11\mod_1251901846864_0.doc @ 72826 @
Pos: 99 /Alle Produkte/Überschriften/H2 Handsender neu einlernen @ 15\mod_1263551696875_121.doc @ 91023 @
Teach-in hand-held transmitter again
Pos: 100 /Alle Produkte/Warnhinweise/HINWEIS - Handsender I-0-Bedienung @ 14\mod_1260800733570_121.doc @ 88131 @
Note!
− The unit is operated using the hand-held transmitter.
− Before using the hand-held transmitter for the first time (D, 2), remove the plastic strip (5) so that the battery
makes contact.
− Press the respective key on the hand-held transmitter for approx. 1 s to ensure that it switches correctly.
When a key is pressed, the LED lights up.
Pos: 101 /Alle Produkte/Dummy_module/Abstand 3pt @ 11\mod_1251901846864_0.doc @ 72826 @
Pos: 102 /Alle Produkte/Inbetriebnahme/Text_Norm: So bedienen Sie das Gerät @ 14\mod_1261132863547_121.doc @ 89193 @
How to operate the unit:
Pos: 103 /Gartentechnik/InScenio FM 1/Bedienung über den Handsender InScenio FM 1 @ 14\mod_1260792341677_121.doc @ 87967 @
Switching the pump on and off
Press the I key once:
Press the 0 key once:
Controlling the pump (the pump is switched on)
Press the I key:
Press the I key again:
Pos: 104 /Alle Produkte/Dummy_module/Abstand 6 pt @ 7\mod_1196627997106_0.doc @ 41651 @
Pos: 105 /Alle Produkte/Überschriften/H1 Störungsbeseitigung @ 7\mod_1196625290699_121.doc @ 41521 @

Remedy of faults

Pos: 106 /Gartentechnik/InScenio FM 1/Störungen InScenio FM 1 @ 14\mod_1260799299577_121.doc @ 88103 @
Malfunction
LED on the hand-held transmitter does not light
up when the transmitter is operated
Unit does not respond to commands from the
hand-held transmitter
Pos: 107 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @
The pump is switched on and controlled at the most recently saved
speed value.
The pump is switched off. The current speed value is saved.
The speed value changes continuously. The fountain height/flow
quantity changes accordingly.
The current speed value is set and saved (the setting is retained
even in the event of a power failure).
Cause
Battery in the hand-held transmitter is dead
Interference over radio distance
Hand-held transmitter defective
Unit defective
Mains voltage switched off
Connected pump is not working
Remedy
Change battery
Choose a different place, ensure unobstruc-
ted view
Replace hand-held transmitter
Replace unit
Switch on mains voltage
Read the pump operating instructions.
Connect the pump directly and check its
function
- GB -
7