Hansgrohe Talis C 141271 Serie Instrucciones De Instalación/Garantía página 5

Tighten the tensioning screws using a screw-
driver.
Install the adapters on the stops.
Install the filters.
Failure to install the filters
may result in unsatisfactory
operation of the faucet.
Connect the hot and cold supply hoses to the
adapters.
Use two wrenches as shown.
Do not allow the hoses to
twist.
Install the drain.
Test the faucet. Check all connections for leaks.
�djust the high temperature limit stop (optional).
English
19 mm
10 mm
5