Sony MDR-IF420RK Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4
Connect the supplied AC power
adaptor to the transmitter.
Transmitter
to DC IN
9V jack
5
Rest the headphones on the
transmitter so that the contact pins
fit into the contact holes on the
headphones. The charging
indicator lights.
Notes
•Use only the supplied rechargeable battery NC-
AA (HJ).
•You cannot recharge other R6 (size AA)
rechargeable battery (NC-AA etc.) with this
unit.
When the indicator is not lit
Check the connection to make sure that
the contact pins are properly fitted into
the contact holes on the headphones, or
if the headphones are rested on the
transmitter correctly.
to an AC
outlet
AC power
adaptor
(supplied)
To recharge the headphones'
battery after use
To charge the battery, follow steps 4
and 5.
Since little electric current is used for
charging, there is no need to worry
about overcharging.
Charging and using hours
Approx.
Approx.
charging
using hours*
hours
MDR-IF420RK
1
1
24
24**
* at 1 kHz, 1 mW+1 mW output
** the hours required to fully charge an empty
battery
Using the headphones with a
commercially available R6 (size AA)
dry battery
Install the battery in the manner as
described in steps 1 through 3 of
"Charging the headphones' battery."
When a R6 (size AA) dry battery is
installed, the battery charge function is
not activated.
Battery life*
Battery
Approx. hours
MDR-IF420RK MDR-IF520RK
Sony alkaline
70
battery LR 6 (SG)
Sony battery R6P
35
(SR)
* at 1 kHz, 1 mW+1 mW output
MDR-IF520RK
1 hour. 15 min.
30
80
40
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mdr-if520rk

Tabla de contenido