Kohler K-7344 Manual De Instrucciones página 3

Align
notches.
Thumb
Screws
1. Install the Assembly
IMPORTANT! This procedure must be followed to ensure proper
installation and handle operation.
Turn the handle counterclockwise to the closed position.
Remove the valve body from the assembly.
Insert the O-ring into the groove of the escutcheon.
Slide the escutcheon with O-ring onto the assembly.
Insert the assembly through the mounting hole.
With the handle still in the closed position, turn the entire
assembly in the mounting hole until the handle is pointing in the
desired closed position.
From underneath the sink, securely hand tighten the nut onto the
assembly.
With the handle still in the closed position, line up the notch on
the valve body with the notch on the assembly, then slide them
together.
Fasten the valve body and assembly together with two thumb
screws. Do not overtighten the thumb screws.
Kohler Co.
Handle
Assembly
Escutcheon
O-Ring
Nut
Valve Body
3 1069077-2-A