LG PREMTB10U Manual Del Usuario página 12

OPERATION INSTRUCTION
12
OPERATION INSTRUCTIONS
Standard Operation - Cooling Mode
What is the three-minute delay function?
The function of the three minute delay is to protect the compressor by delaying the output
of cool air if the cooling mode is interrupted.
Cooling mode restarts after 3 minutes when the compressor starts to operate.
• For Option 2, when setting the desired temperature in the upper range of 87-99 °F (30.5-
37.5 °C), the indoor unit will shut off if the indoor temperature is lower than the desired
temperature.
• When using a central controller, a displayed value of the desired temperature may differ
depending on a function of the product.
• If indoor unit has 2set point function selected, unit will turn off thermal once the desired
set point is achieved.
Press button to turn on the
1
indoor unit.
Press button to select
2
Cooling operation mode.
3 Adjust the desired temperature
by pressing buttons.
When setting the desired
temperature higher than room
temperature, the fan will blow
room temperature air instead of
cold air.
h Setting temperature range :
Option 1. 64~86 °F (18~30 °C) (default setting)
Option 2. 64~99 °F (18~37.5 °C)
Option 3. 50~99 °F (10~37.5 °C) (if connecting
to indoor unit with 2set point function)