LG PREMTB10U Manual Del Usuario página 22

OPERATION INSTRUCTION
22
Standard Operation – Temperature Setting
• For air-cooling set point, from 64~86 °F (16~30 °C), and for heating set point, from
60~86 °F (16~30 °C), you can select desired temperature.
h A temperature area of extended range can be selected through desired temperature
range setting option.
- Cooling : 64~99 °F (16~37.5 °C) / Heating : 40~86 °F (4~30 °C)
• 10°F is proper for the difference between room and outside temperature.
- When combined with other controllers, the temperature displayed on each controller
may differ.
• For indoor temperatures below 50 °F (10 °C), the value perceived by the Thermostat (with
cable) is displayed.
1 Press the buttons to adjust the desired
temperature.
In Auto mode, adjust cooling and heating set
points individually by pressing the cool or
heat set point selection button.
: Increase Temp. per one time
pressing
: Decrease Temp. per one time
pressing
• Set temp: Indicates the temperature
that user wants to set.
Cooling operation:
- The cooling mode doesn't work if desired
temperature is higher than room
temperature. Please lower the desired
temperature.
Heating operation:
- The heating mode doesn't work if desired
temperature is lower than room
temperature. Please increase the desired
temperature.
Checking the room temperature
When Thermostat is running, the room
temperature will be displayed on the screen.
Room temperature display range
Fahrenheit: 33-9°F
- below 32°F: displays 'LO'
- over 100°F: displays 'HI'
Celsius: 1-39°C
- below 0°C: displays 'LO'
- over 40°C: displays 'HI'
- Because of location of temperature sensing,
the real room temperature and this displayed
value can be different.