LG PREMTB10U Manual Del Usuario página 37

Function Setting - Set back temperature
This function is to set the default temperature set points for set back operation.
It is used when the controller doesn't have a last known unoccupied schedule.
OPERATION INSTRUCTION
Use button to select Set back
1
temperature setting. Press
repeatedly to select Set back
temperature (
point icon flashes as illustrated below.
Use button to set cooling set point.
2
After that, press
set heating set point. Using
can also set heating set point.
Press button to complete
3
the setting process.
Press button to exit.
4
After setup, it automatically exits
after 60 seconds if there is no
input. If the Setting/Cancel
button is not pressed, the mode
will not change
37
button
). The cooling set
button to move to
button, you