LG PREMTB10U Manual Del Usuario página 76

INSTALLATION INSTRUCTIONS
76
Installer Setting - Fahrenheit / Celsius Switching
This function is used for switching the display between Celsius and Fahrenheit.
h Whenever press
degrees.
1
2
3
4
5
button in Fahrenheit mode, the temperature will increase/drop
Press the button for 3
seconds to enter the Thermostat
installer setting.
- If pressed for a shorter time, it
enters into user setup mode.
Press the button to select Function
code 12
Select Temperature unit mode by
pressing buttons.
(00: Celsius, 01: Fahrenheit)
Press button to save or release.
Press button to exit or
system will automatically exit
after 25 seconds without any
input.