Fax +1 305 430 9692
BEFORE USE
(see also part description p.20)
Each mill runs on 6 x AAA/LR03 batteries.
•
Open the battery housing by turning the bottom cap of the mill
•
counterclockwise. Remove the bottom lid, and using the steel
ring, lift the battery cradle out by raising it.
Insert the batteries in such a way that the polarity of each battery
•
is respected, and matches with the symbol indicated on the
battery cradle.
By pressing the switch on the top of the battery cradle, you
•
should hear a motor noise.
To close the battery housing, put the battery cradle back into the
•
appliance, and replace the bottom cap turning it clockwise until
it gets locked firmly (but not too tight).
To fill with pepper or salt:
Turn the upper stainless steel lid/grinding head counter-clockwise,
•
to expose the refill chamber. The arrow shall be above the
"Unlock" sign.
Fill the transparent refill chamber with salt or pepper.
•
Close the lid by returning it back into its initial position, lock in
•
place by turning the upper stainless steel part counter-clockwise,
until the arrow reaches the "Lock" symbol.
USE
Before seasoning your meals, you can adjust the fineness of the
•
ground salt and pepper by turning the adjustment wheel on the
underside of the mill.
To do so, turn the wheel clockwise for a finer grind and
•
counterclockwise for a coarser grind.
Hold the appliance above the meal to season. There is no button
•
to push, grinding will start automatically when the grinder is put
upside down (gravity-activated and automatic function) - see
Fig. A page 20.-
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
3
Assembly page 3/20
special
instruction
from
Team
Print only
PPG 37241 - 120501