Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INDEX
General safety rules for power tools
SPECIFICATIONS
Motor: 1/10 H.P. 120 V. 60 Hz.
depth of 90º cut: 2" (50.8 mm)
depth of 45º cut: 1" (25.4 mm)
throat: 16" (406.4 mm)
blade lenght: 5" (127 mm)
Stroke per minute:
GENERAL SAFEW RULES FOR POWER TOOLS:
WARnInG: When using electric tools the following basic safety precautions should always be followed to reduce the
risk sf fire, eeectric shock and personal injury.
PLEASE READ ALL THESE INSTRUCTIONS
BEFORE ATTEMPTING TO OPERATE THIS
PRODUCT.
1. KeeP WORK AReA CleAn. Cluttered areas and benches
invite accidents.
2. dOn't USe In dAnGeROUS enVIROnMent. do not use
power tools in damp or wet location, or expose them to rain.
do not operate them in an area with flammable liquids or gas-
es. Keep work area well lighted.
3. GUAIRd AGAInSt eleCtRIC SHOCK. Avoid body contact
with earthed or grounded surfaces.
4, KeeP CHIldRen AWAy. Ml visitors should be kept at a
safe distance from work area. do not let visitors touch the tool
or extension cord.
5. MAKe WORKSHOP CHIld PROOF. lock access of your
workshop. When not in use, tools should be stored in a dry
locked up place, out of reach of children.
6. dOn't FORCe tOOl. It will do the job better and safer at
the rate for which it was designed.
1,725
2
2
3
4
4
5
6
7
7
3
Stroke: 3/4" (19 mm)
table size: 10" x 17" (254 x 432 mm)
table tilting: 45º (l / izq. )
Machine dimentions: 23-3/8" x 12-1/2" x 13-3/8"
Weight: net/gross: 21/23 Kgs.
7. USe FUGHt tOOl. don't force tool or attachment to do a
job for which it was not designed. do not use tools for pur-
poses not intends; for example do not use circular saws to cut
tree limbs or logs.
8. WeAR PROPeR APPARel. do not wear loose clothing,
gloves, neckties, rings, bracelet, or others jewellery, which
may get caught in moving, parts. no slip footwear is recom-
mended. Wear protective hair covering to contain long hair.
Roll long sleeves above elbows.
9. PlWAyS USe SAFety. GOGGleS everyday glasses only
have impact resistant lenses, they are nOt safety glasses.
Also use face or dust mask if butting operation is dusty.
10. COnneCt dUS1 eXtRACtIOn eQUIPMent. If devices
are provided for connection of dust extraction and collecting
facilities ensure these are connected and properly used.
11. dO nOt AbUSe tHe CORd. do not use cord to discon-
nect during operation. never yank the cord to disconnect it
from the socket Keep the cord sway heat, oil and sharp edg-
es.
1
(594 x 317.5 x 340 mm)
large - width - height
10
11
12
12
13
13
Publicidad
Tabla de contenido
